How To Install Under Sink Water Filter. After turning off the waterline, make sure to get rid of the remaining water in the water line before starting the installation job. Then, slide the plastic pipe onto the faucet.
RV Under Sink Water Filter Install YAWESOME from yawesome.com
The next step is to connect the water line to the filtration system. Water filters come with two pipes. While you are doing this, you’ll need to have a friend hold the faucet in place.
The Next Step Is To Connect The Water Line To The Filtration System.
Then connect the outlet hose to the faucet. Their low cost and easy maintenance are also a huge plus. You can archive this by making lose the nuts and taking the tubing from the valve fitting.
Push The Hose Up Into The Connector.
Connect the existing faucet to one output of the adapter and the water filter to the other side. The water filter under the sink is installed inside the cabinet beneath the sink. This action disconnects the shut off valve and the cold water line.
Hold Up The Mounting Bracket Around The Filter And Mark Where The Screws Will Go.
Turn off the cold water supply under your kitchen sink. Don’t forget to use gaskets and putty underneath the washer to secure the hole completely. One practical way to spice up your kitchen is by adding an under sink water filtration system.
Put The Red Clip Into The Top Of The Collar (If It Came With Clips).
Slide the faucet in the new hole along with the washer. Attach the back plate and locking washer into the faucet. Utilize a bowl wrench to release the nut holding the tubing on the fixture stem.
Before Drilling Holes And Cutting Pipes, Make Sure You Know Where To Put The Under Sink Filter.
So, there may be a. Leave the faucet open until all the remaining water is drained. Tighten the fittings from underneath the sink as your friend holds the faucet from the top.
Location:
Share :
Post a Comment
for "How To Install Under Sink Water Filter"
Post a Comment for "How To Install Under Sink Water Filter"